Ok, I forgot the voltage drop =\ I got LED light so should be fine. What I should do is put your circuit to the test without the capacitor and check if the voltage is low enough for the capacitor to handle ? How should I balance the capacitors ? (Even if I will not take this path, I would like to know)
Thanks again for your help
What I wanted to do was something like that
Though you seem to have a better knowledge and better circuit. I bought 2 super cap 5.5v so I wanted to put them in series (though get half the capacitance). Your approach seems to be better and I may take it. Though mine should be working ? Keep in mind that I’m a nooby in electronics and I keep learning from the internet so not the best to have solid base…
Does your solution works with 5.5V, the 6V dynamo does not blow it ?
Thank you for your answer I really like it.
Did you wait for them to die before ?
Seems bad so, I have to make a diode bridge rectifier so =\ need to scrap more diode ! Too bad as I wanted to make something small
Really good point, though as a stupid human I didn’t understood what was the difference between the Nxt 60 steady and the Nxt 60 E bike… Now I know. I don’t have this marvelous option =\ explaining why the back doesn’t light up either… Thank you for pointing it out, I couldn’t get the article from the site itself so I took another seller and it was not available (it is now)
Indeed, 2 pair of 2 wires so 4 wires can be connected to the dynamo.
I will try that, I need to find some proper diode then find the capacitor or buy it and I should be good. I’ll keep you in touch if I manage to find the parts. Thank you
Yes but it should not be like 30 seconde long I think, so it should be OK for a bicycle :)
I should have put the stuff I have, so here you are : Dynamo : https://www.axasecurity.com/bike-security/en-gb/products/lights/7/93903195SC/axa-hr-traction-right Rear light : https://www.axasecurity.com/bike-security/en-gb/products/lights/7/93929195SC/axa-juno-e-bike-6-12v-80-mm Front light : https://www.axasecurity.com/bike-security/en-gb/products/lights/7/92520095SB/axa-nxt-60-steady
Indeed it seems like a great project I think the output is DC though I’m not sure. To be honest I tried to put a capacitor (50V) put it seemed to had no effect (maybe to little capacitance or more probably the coil of the motor should have eaten the storage. Is probably should add a diode to the circuit, am I right ?
You were rights… Bad exe files, even now I’m not sure I believe it. Thank you :) !
OK I will try when I get time, I didn’t download it from fitgirl though. I’ll keep you in touch if I can get it working ! Thanks for your help :)
I’m pretty sure I ran the good exe file, the game is Still Wakes the Deep I’m not sure why it happened but the issue happened with kubuntu also I did found the vcrun and this issue disappeared, though for DirectX I don’t know which DLL choose.
Thank you for your answers, I swapped back to kubuntu and will see if I can get it working. Thank you for your time and sorry for the bother.
He may not, maybe he’s talking about the sound when the car isn’t fast enough to alert people on the street, just to let know that something is coming. It shut at a certain speed I think
I’m sorry I can’t check now but I saw earlier that red means spelling issue and blue means grammar issue. If I find the post I will reply to this post :) Edit : there you go : https://reddthat.com/comment/9809409
I’m not sure I understand what you mean… What switch color ?
You should use the Fdroid version if you are not confident about what you are doing (in my honest opinion)
To add some dictionaries go to the website then download one dictionary : 
Then click on the + button to add the dictionary you download :
Then select the one you downloaded and you should be good :)
Have a nice day !
To save people some times : Barrier seems to be an app meant to control multiple devices with the same mouse and keyboard. You need to install the software on all the machines for it to works.
You can then bind a keyboard shortcut to switch device. You can also bind it if you put your mouse at the and of a screen.
Take care you all
Cemu I don’t know, for yuzu, what I did was put the yuzu emulator resolution to 1920x1050 (forcingresolution for external display and steam deck display) then navigating to the control menu. Click the motion button, (not the tick one, the one that ask for rebinding the button) then it ask to shake. Shake it! And should be OK.
Remindme! 4 days