I usually do the Hoffmann method if I’m making it for myself and the default recipe if making for my wife and I but the last couple days I’ve mixed it up and tried out the inverted method:

Time: 1min 30sec

  • Use a medium-fine grind.
  • Put the plunger to the “bottom” (top while inverted) of the 3 so I’ll get a half cup’s worth of infusion
  • add my grounds, 2 AeroPress scoops (22-26oz depending on roast and moisture content)
  • get water to boiling (if a light roast)
  • add enough water to make a paste, do a 30 second bloom
  • add more water until it’s 2/3 full. Stir for 10 sec
  • add water until it’s almost to the top and wait until the timer gets up to 1:15. While waiting, wet the filter and get the top ready
  • give it another few stirs at 1:15 then top off until the water is at the top
  • at 1:30, cap and press. I like to do it into a Pyrex measuring cup.
  • this should yield 1/2 cup of brew (4oz). I then add water up to the 1 cup mark (8oz line) and put 1/2 into the first mug. I fill it up again until the 1 cup and pour that into the second. Add another 1/2 cup of hot water to the first mug and presto, you have two delicious 8oz mugs of coffee!
  • andkit@lemmy.world
    link
    fedilink
    arrow-up
    1
    ·
    1 year ago

    Beside the convenience of machine-brewed coffee I found the aeropress to be an extremly forgiving brewer. I can’t remember ever making bad coffee with it (though I’m a taste barbarian, I enjoy strong flavors, but fine nuances are lost to me, so YMMV). As such my “recipe” is dirt-simple an can be done before having coffee (that circular dependency is always a problem with other methods).

    • I have that Fellow Prismo thingie, so need to mess around with brewing inverted
    • I usually add a paper filter to the metal filter, but more for cleanup reasons than taste
    • 15g beans, finely ground but not quite espresso-fine
    • Quickly add 100ish grams of boiling water
    • stirr
    • fill up to 250g water total
    • put on the plunger
    • wait about 2-3 minutes, plunge & enjoy

    For my friend, or if I’m feeling the occasionly sweet tooth myself, I do basically the same just with 125g total water (can be added in one go, I only stirr after 100 above as it is easier and less prone to make a mess if you are too vigorous) The “missing” 125g of water are then replaced with 125g of milk (or a milk-replacement of your choice) + 5g (or 10 for the espially sweet toothed) sugar that receive the nanofoamer treatment

    But as I said the Aeropress is extremly forgiving, you can diverge from the recipe quite a bit and still get good coffee. Sometimes I’m distracted and only come back to plunge after 8 minutes and the coffee is still good. Spoon was too full and now its 16g? No need to pick beans out of the grinder, that’ll work too. If you have a feeling for measurements (I don’t) you can just eyball that stuff and not sweat the details

    • moosh@lemmy.worldOP
      link
      fedilink
      arrow-up
      2
      ·
      1 year ago

      How are you able to get 250g of water in? I only was able to fit about 225 with 15g of grounds.

      • andkit@lemmy.world
        link
        fedilink
        arrow-up
        1
        ·
        1 year ago

        Are you breweing inverted? That’ll loose you some capacity. If you have very fresh beans it might also help to wait a little longer after stirring for the CO2 to get out and not have too much foam on top

        • moosh@lemmy.worldOP
          link
          fedilink
          arrow-up
          1
          ·
          1 year ago

          I’ve tried both but since I don’t have a prismo, if I’m brewing normal I try to get the plunger on ASAP so I don’t loose too much water. Instead I skip the stirring if I’m making it for myself, let it steep and then give it a little jostle 30 sec or so before ready to plunge.