I have a CR 6 Max and I took apart the extruder and now whenever I put it back there are always problems.
Firstly the spring is impossible to put back correctly so it never aligns perfectly.
When I managed to screw in the screws such that is was as good as I could make it, now the filament does not insert properly.
How do I proceed from here? Is there an easier way to put it back together? Is it possible to get another extruder that works differently but is compatible with the cr 6 max?
You must log in or # to comment.
You’re talking a Bowden extruder?
Micro swiss has a nice dual gear upgrade that can drop in.
It’s very reliable.
Alternatively, if you drop pictures we might be able to help without going to that.
Don’t have the max version but I believe they shared the same extruder as cr6 se
This video shows how to put it back together https://www.youtube.com/watch?v=adVzvhmIKZM
And they are several option to replace extruder. Cheap one are the same compatible of ender 3 like this one at 4€ https://a.aliexpress.com/_EyXIa19 but you will have to print a raiser for the filament sensor
Here is an alternative Piped link(s):
https://www.piped.video/watch?v=adVzvhmIKZM
Piped is a privacy-respecting open-source alternative frontend to YouTube.
I’m open-source; check me out at GitHub.
