Yeah was just about to say the same. I had a OnePlus 5 where the cable wasn’t staying in because pocket lint had built up inside in then gotten compressed by me putting in the charger cable. Thin needle and a torch sorted it right out.
Mine doesn’t seem to have much dust in it (I don’t usually keep it in a pocket) and it seems like the cable seats all the way, but more of a situation where the metal housing is bent so doesn’t grip the cable properly. 🤷
Edit: well ill be… I got a needle in there. Very little came out. Cable seats in what looks like the exact same depth as before, but now it holds the cable better. Mind blown. Apparently 0.1mm worth of dirt is all it takes
My port also got wallered out but it’s a very easy swap. 2 case screws, pop off the back, undo 2 more screws to remove the USB/audio jack assrmbly and swap in the new one. No glue, no kamikaze springs, no muss, no fuss.
Its a $5(ish) part plus shipping from iFixIt, and took me 20 minutes. I replaced the battery too, sonce I was already in there with the back off. Also an easy swap.
Ayoo, I’m over here on a 5T with LineageOS, and it’s like its still a new phone. Get outta heah with that “5 not 7” bullshit, they last just fine
I know, I know… Your revenues.
Same. The USB port struggles to retain the cable sometimes, but this phone has kept me happy for a very long time.
I wonder what it would take to just repair the USB port.
For my phone (almost 7 years old), a thin needle to scrape out all the dust is sufficient. Pressurized air also helps.
Yeah was just about to say the same. I had a OnePlus 5 where the cable wasn’t staying in because pocket lint had built up inside in then gotten compressed by me putting in the charger cable. Thin needle and a torch sorted it right out.
Once you’ve cleaned it out you can buy USB-C port covers. They are so cheap for a bunch of them and prevents the issue from happening again
I assume you mean flashlight and not a flame.
No he uses flamethrower for light get overit .
Mine doesn’t seem to have much dust in it (I don’t usually keep it in a pocket) and it seems like the cable seats all the way, but more of a situation where the metal housing is bent so doesn’t grip the cable properly. 🤷
Edit: well ill be… I got a needle in there. Very little came out. Cable seats in what looks like the exact same depth as before, but now it holds the cable better. Mind blown. Apparently 0.1mm worth of dirt is all it takes
That can also happen if the cable is worn out. They’re designed to wear faster than the port, since that’s much harder to replace.
My 5t is holding better than my 8pro. They it make em like they used to
My port also got wallered out but it’s a very easy swap. 2 case screws, pop off the back, undo 2 more screws to remove the USB/audio jack assrmbly and swap in the new one. No glue, no kamikaze springs, no muss, no fuss.
Its a $5(ish) part plus shipping from iFixIt, and took me 20 minutes. I replaced the battery too, sonce I was already in there with the back off. Also an easy swap.
I blame the hardware chipset manufacturer