This is the second time this has happened. It looks like it added part of the model on to the side. Is it my slicer? I’m using a Creality Halot Mage, and Chitubox 1.9.5 because that is the only slicer I’ve gotten to work on Fedora that supports my printer that I’ve found. I’m completely new to all things 3d printing. This is my first printer and that is my sixth print in the picture.
I bet you printed this huge thing flat in the build plate?
You would think that
So… did you?
Contrary to fdm printing, resin printing doesn’t like large xy cross-sections because that means huge forces between the part and the fep.
This suction and pulling can lead to delamination of layers.
Not the OP, but what do you mean by this? I feel there’s an implication that it should be laid out a different way?
deleted by creator
Pretty sure that’s resin though. Also, their issue is likely printing large flat piece flat in the build plate.
Counterintuitive between resin and fdm, but resin didn’t like large flat cross-sections.deleted by creator
what the heck IS happening here? The scratches, the extra chunk…it’s possessed
Did you recently replace the screen? It looks like there might be light leaking in around the edges, and that you should either replace the FEP because its getting too loose or increase your peel height
New Lemmy Post: What is happening to my prints? (https://lemmy.world/post/9492575)
Tagging: #3dprinting(Replying in the OP of this thread (NOT THIS BOT!) will appear as a comment in the lemmy discussion.)
I am a FOSS bot. Check my README: https://github.com/db0/lemmy-tagginator/blob/main/README.md